Cheesebrough Wood Rakes & Wooden Flagsticks

At left shows the Tradition in exotic hardwood with sealer.  It has an 8" brass base fitting.  Exotic hardwoods are left natural or protected with a low gloss penetrating sealer.

Elegant accessories for your grounds

Inset shows the pin option for temporary turf placement.

morey practice flagsticks change the look of your practice greens dramatically.  Most are available in 30" and 36", and we can build to your needs. The ball cup can be inverted for use on a firm level surface, and a spike option allows temporary turf placement.  Exotic hardwoods are available for all models.


Left and right show the 30" Stout with our Universal flag mount.  The white/blue stripe has a blue over white Twin Pennant nylon flag. At right shows a 30" in exotic hardwood without sealer. Exotic hardwood will turn gray over time, or can be kept dark with periodic application of sealer as shown below.

    
 

Stout

The Perennial is our most popular. The profiled wood body has 9/16" brass end fittings with a 1" center. At right shows a natural finish with a morey Twin Pennant heavy weave flag. The ball cup is inverted for free standing use.  To its right is our stock Early American finish with the ball top grip. This Perennial is most often used as shown immediate right, with no flag.  

At left shows the "Universal" flag mount for the Perennial.


 

Que

At right is our Stout practice stick.  It can be built with a brass cap as shown, or with a brass stud on the cap for flag or grip mounting. The Stout has an 1 1/8" hardwood body with solid brass end caps.  Stock stain color is Early American, a medium brown.  Stock paint colors are white and yellow.  Custom stain and paint colors are available. 
As the name implies, this stick tapers from the 9/16" brass fitting at the base, to 1 1/8" at top.  It can be built with a brass cap as shown, or with a brass stud on the cap for flag or grip mounting.

Perennial

Tradition

morey ™ Practice Flagsticks

The tube on the typical flag can damage the finish on a wooden flagstick.  To protect your stick, we can install our 1/2" fiberglass rod "Universal" flag mount.  The brass sleeve at the base of the fiberglass rod provides a rub surface for the tube.  The universal mount allows installation of any golf flag other than the very small diameter tubes.   

"Universal" flag mount: